Name: Kristin

Date: 6/19

Problems with lanes:

Lane 3 - the motor came unplugged today. Random.

Lane 4 - All sorts of things happened to lane 4 today. There was the changing of the ball wheel belt, a problem with the cross conveyor, the turret belt becoming stuck under the rotating disc, the torsion latch not having enough tension, and the lane needing to be reset by the breaker. Thanks to the combined prowess of Chevy, Danny and me, we were able to get it running.

Lane 5 - Three jams in the turnaround pan tonight. Also had a deck jam in the 5-pin chute and double-dumped once but did not jam somehow.

Lane 7 - At the end of the night, part of the belt on the pulley that drives the cross conveyor belt came off.

Actions Taken:

3 - Plugged the motor back in!

4- Too many things to name but normal procedure was followed. Currently, for the torsion latch, a drill bit is holding it in place rather than a pin. It was a suitable replacement for the dumb spring that didn't work well. Must remember to check on that until the pin arrives.

5 - Unjamming pins all over the place.

7 - Put the belt back on.

Things to look out for (finicky lanes): The torsion latch on 4 and more of the same on 5. Something will be done.

Ordering: