Date: 8/18
Problems with lanes:
Lane 1 - There was one deck jam in the 10 pin slot.
Lane 5 - multiple jams in the turnaround pan tonight. It was far more frequent tonight than it has been lately.
Lane 6 - There was a jam in the turnaround pan once and a piece of what looks like the beam that the motor is plugged into on the cross conveyor.
Lane 7 - Problem child! At the beginning of the evening, the spring had fallen off the right blocking finger, making the 5 pin chute trigger very difficult to trip. Thankfully Danny was still around and easily detected the source of the problem.
Lane 8 - the 2nd pin in the turret kept falling in slightly at an angle, which wouldn't trip the lever, and basically held everything up.
Actions Taken:
The usual nudging and unjamming. Danny put a new spring on lane 7 which should hold up fine.
Things to look out for (finicky lanes):
Ordering:
Actions Taken:
The usual nudging and unjamming. Danny put a new spring on lane 7 which should hold up fine.
Things to look out for (finicky lanes):
Ordering:
No comments:
Post a Comment