Name: Kristin

Date: 8/29

Problems with lanes:
Lane 4 - There were a couple of deck jams due to the housing on lane 4. I gave it a good duct taping today and so far it's fine...hopefully it will last until the new one comes in. Also, it needed to be reset at the breaker once.

Lane 5 - The light! gaaahh, it was being so finicky today. It refused to light up properly, and the usual methods just made it slip out of the housing. Twas evil.

Lane 6 - The shakerboard belt popped off again today.

Lane 7 - Did not index after the 2nd pin was dropped into the turret.

Lane 8 - Had a turret jam because the 2nd pin in the turret was crooked.

Actions Taken:

Lane 4 - Unjamming! Resetting!

Lane 5 - I pulled on of the strips of tape on the light fixture tighter and loosened the other for more wiggle room. It worked on my test so maybe it will be good tonight.

Lane 6 - Put the belt back on and once again, tightened the locking nut on the pulley to the best of my ability.

Lane 7 & 8 - The usual nudging.

Things to look out for (finicky lanes):

Ordering: