Name: Kristin

Date: 9/21

Problems with lanes:
Lane 2 - There were a few deck jams due to the spider not latching properly after the pins dropped into the deck. Also, the sensor was not triggered a couple of times - the reset button on the lane can be unresponsive sometimes which I label as 'not good.'

Lane 4 - There were some deck jams in the 5, 10 and 9 pin housings. Also, once the clutch belt fell off and the circuit needed to reset (simultaneously). Which was odd.

Lane 6- Still a little noisy but not so bad. The clutch drive belt fell off once too. It's like 4&6 decided that they just wanted to do something together today.

Actions Taken:
The usual for the usual.

Things to look out for (finicky lanes):
The shakerboard on 6 is eating the pins.
Ordering: