7/20/10

Name:Danny

Date: 7/18/10

Problems with lanes: Don't ask my how, why, with what weapon or in what room, but the moving deck cable came off the Geneva pulley on 8, which in turn caused the moving deck to slide back much further then it ever should. The cables also fell off of the other pulleys on the blah blah blah and messed with a bunch of over stuff....sucked

Actions Taken: Put all the cables back on all the pulleys and yada yada yada.

Things to look out for (finicky lanes):The moving deck not shifting, pins dropping on the lane before the deck even reaches it.

Ordering: Girl scout cookies.....please

Date: 7/20/10

Problem with lanes: Two days, later, and 8 day still not want to behave. Long story short.... When the rake came back to do it's sweep, the screws attaching the rake board to the rake arm on the right side (From bowlers perspective) Came loose. the rake board slide behind the drop of the lane surface and halted it's motion. The machine completed it's cycle with the rake jammed reward. Somehow, this bent a rod going from the rake hook cam to the C clamp, c arm, C whatever the fuck. So, I have been spending all evening trying to get this rod straight. It has been in the vice through out the whole night. I keep taking it out and turning it to get out all the kinks. Just a moment ago, I tried to reattach it, despite the fact it had a little bend in it still,well, no dice. This thing is just not going to work without it being straight. So after a couple of failed attempts to try different methods of straightening it out, I did a lot of drugs, banged a customer on a skee ball machine and left for the evening at 11:30...Just checking if you are still reading this long fucking blog. Anyways, it is back in the vice, yet again. I strongly believe that when it can be straightened out, it shall work and work and work, until 2 days from now when it decides to break in some other off the wall way......And to all a good night.

Actions taken:

Things to look out for

Ordering: